FAQ

Why should the water level be at the lowest visible place of the water gauge before ignition?

After the boiler is ignited, the temperature of the boiler water gradually rises, the volume gra

What is the purpose of boiler flushing? How to flush the tube?

The purpose of boiler flushing is to use the boiler’s self-generated steam to flush out the rus

What is the purpose of boiler pickling? How to carry out pickling work?

The purpose of pickling is mainly to remove impurities such as iron oxide, copper scale and iron

How to prevent boiler overpressure during hydraulic test?

The water pressure test is a major operation related to the safety of the boiler and must be car

What are the types of boiler hydraulic test? What is the purpose of the hydraulic test?

The hydraulic test is divided into working pressure test and overpressure test. The purpose of t

What are the regulations on the time and temperature of water supply before the boiler starts? why?

The water inlet speed before the boiler is started should not be too fast, generally not less th

What should be done before the newly installed boiler is started?

These tasks include: (1) Water pressure test (overpressure test), checking the tightness of pres

Operations to be performed after the boiler is shut down

Stop the fire: first turn the small fire knob to the low fire position, and then turn off the bu

What are the tasks required for the daily maintenance of the boiler?

1. Daily work
(1) Check the function of the water level regulator: whether it can automatically