Welcome to XinLi Boiler

email Email:  info@xinliboiler.com        

FAQ
Home > Solution > FAQ

How many cubic meters of natural gas does a 2 ton gas boiler use? Gas pressure of natural gas boiler

2021-04-08 09:31    page view:

Guide: The output of a 2-ton gas-fired boiler is 1.2 million kcal, and it produces 2 tons of steam for one hour of full-load operation. Gas boilers are known for environmental protection and energy saving, and their gas consumption has attracted much attention from users. At the same time, the gas boiler combustion equipment is a burner, which has certain requirements for gas pressure. The Xinli boiler manufacturer will work with you to understand the natural gas consumption and gas pressure of the 2 ton gas boiler.

The output of a 2-ton gas-fired boiler is 1.2 million kcal, and it produces 2 tons of steam for one hour of full-load operation. Gas boilers are known for environmental protection and energy saving, and their gas consumption has attracted much attention from users. At the same time, the gas boiler combustion equipment is a burner, which has certain requirements for gas pressure. The Xinli boiler manufacturer will work with you to understand the natural gas consumption and gas pressure of the 2 ton gas boiler.

1. Natural gas consumption of 2 ton gas boiler

  The heating value of a 2 ton boiler is 1.2 million Kcal, and the calorific value of natural gas is 8600 Kcal/m³. The consumption of natural gas for a 2 ton gas boiler = heating capacity of the boiler ÷ thermal efficiency ÷ calorific value of natural gas = 140 m³

  When users calculate the cost of natural gas boilers, in addition to the gas consumption of gas boilers, the fuel consumption and operating costs of other boilers such as coal and biomass are also more concerned by users. Simple data is presented as follows: diesel oil per hour is more than 60kg, coal-fired boiler is about 120-150kg, and biomass particles are about 180kg.

  The above fuels are based on the following standards: natural gas heating value 8600Kcal/m³, diesel heating value 12000Kcal/kg, coal heating value 5000Kca/kg, biomass pellet heating value 4000kcal/kg. Boilers rarely run at full load during actual operation, so the actual fuel consumption will fluctuate within a certain range depending on the operating conditions.

2ton oil gas boiler

2. Gas pressure of natural gas boiler

  The gas pressure of a 2 ton natural gas boiler is 10-12kpa. The required gas pressure of a gas boiler is directly proportional to the boiler’s evaporation capacity, which is directly related to the size of the burner. Under normal circumstances, the gas pressure of gas boilers below 0.5 ton requires about 3kPa, and the gas pressure of gas steam boilers above 1 ton requires gas pressure. Range above 6kPa.

3. Preparations for purchasing natural gas boilers

  Before installing a natural gas boiler, users need to make preparations for the operation of the boiler, such as building a boiler room, water and electricity in the boiler room, gas and water sources, and boiler staff must be put in place one by one. The size and layout of the boiler room should meet the layout requirements of the boiler room to ensure that the auxiliary equipment can be located in each position.

The above is a brief introduction of how many cubic meters of natural gas is used in a 2 ton gas boiler, and the gas pressure of the natural gas boiler. I hope it can be helpful to you. If you have other questions, you can call or consult online.

CONTACT US

Resolve Your Problems within One Minute

xinli email

Email:info@xinliboiler.com

wechat

WeChat

xinli whatsapp

WhatsApp:0086-13803825084

xinli company address

Address:No.11 Minhe Road, Private Industrial Park, Development Zone, Kaifeng City

INQUIRY

If you have any questions about our company and products,
please contact us immediately. Any inquiries and Suggestions would be appreciated.
We will keep your information confidential.

Online Inquiry
online chat
order
0086-13803825084
info@xinliboiler.com
Back Top