Welcome to XinLi Boiler

email Email:  info@xinliboiler.com        

FAQ
Home > Solution > FAQ

How to flush the water level gauge?

2020-08-11 14:41    page view:

Guide: 1. Close the steam side valve and the drain valve, open the water side valve, and fill the water level gauge with water. 2. Close the water side valve and open the drain valve to drain the water level gauge. 3. Close the drain valve, open the water side valve, and fill the water level gauge with water.

  ★ Close the steam side valve and the drain valve, open the water side valve, and fill the water level gauge with water.

  ★ Close the water side valve and open the drain valve to drain the water level gauge.

  ★ Close the drain valve, open the water side valve, and fill the water level gauge with water.

  ★ Repeat the steps (2) and (3) above until the water level gauge is clear.

  ★ Close the sewage valve, open the steam side and water side valves, and resume the operation of the water level gauge.

  ★ Close the drain door to check and check the indications of the two water level gauges. They should be consistent and slightly shaken.

CONTACT US

Resolve Your Problems within One Minute

xinli email

Email:info@xinliboiler.com

xinli telephone

Telephone:0371-55261818

xinli whatsapp

WhatsApp:13803825084

xinli company address

Address:No.11 Minhe Road, Private Industrial Park, Development Zone, Kaifeng City

INQUIRY

If you have any questions about our company and products,
please contact us immediately. Any inquiries and Suggestions would be appreciated.
We will keep your information confidential.

Online Inquiry
online chat
order
13803825084
info@xinliboiler.com
Back Top