FAQ

How to control the drum water level during the boiler start-up process?

During the start-up of the boiler, the water level of the drum should be controlled and adjusted

How to adjust combustion during furnace startup?

During the start-up of the boiler, attention should be paid to the monitoring of the flame, and

How to control the temperature difference of the drum wall within the specified range during the sta

To control the temperature difference of the steam drum wall within the specified 40℃ during th

Why should the pressure rise speed be strictly controlled at the initial stage of boiler startup?

When the boiler is started, the steam is generated due to the heat absorption of the water wall

What is the purpose of furnace ventilation before the boiler starts?

The purpose of furnace ventilation is to discharge combustible gases and substances that may exi

What is the sliding parameter start of the unit? What are the advantages?

The boiler and the steam turbine generator set are started at the same time. While the boiler is

What are the types of boiler startup methods?

According to the state before the device starts, it can be divided into cold start and hot start

Why do we need to specify the temperature and time required for water supply when the boiler is wate

The boiler operating regulations have clear regulations on the water supply temperature and wate

Why should the induced and blower ventilation be started for 10-15min before the boiler is ignited?

In order to prevent combustible gas or pulverized coal remaining in the furnace after the last s